2008 Radial Tire Schedule
Tomato Nationals @ Immokalee (Completed)
US Street Nationals @ Bradenton (Completed)
February 2008
2000.00 to Win sponsored by SEA TECH CONSTRUCTION
South Florida Stock Suspension
Immokalee Regional Raceway
Memphis Motorsports Park
March 2008
OUTLAW DRAG RADIAL RULES
Body
Stock body lines must be retained Hood scoops allowed but must not protrude above halfway position on windshield. After market wings allowed maximum length from transition point of deck lid17 inches. Factory appearing grill and headlights required.
Interior
Interior required. This includes dash and dash pad, , carpet, headliner, door panels and both front seats. Rear seat is optional only if area under it is carpeted. Dash pad may be notched for roll bar clearance. Nitrous bottles in passenger area are allowed and must have approved safety vent to outside.
Front Chassis/Suspension
Stock front frame rails and suspension required. After market control arms and bushings allowed as long as they bolt in stock locations. Rack and Pinion steering allowed. After market shocks, bolt in coil overs and after market direct replacement struts allowed, but must bolt in stock location. After market K-members are allowed. Factory sub- frames only. May be notched for clearance.
Ride Height
Minimum 3 inches in front of front tires.
Rear Chassis/Suspension
Stock suspension only. Bolt on traction devices only. No ladder bars. No after market 4-links. Coil over shocks allowed. Welded anti-roll or torque arm devices allowed. Small tubes only. Original frame rails, front & rear, in stock location required. Suspension components must be attached to frame rails in factory manner. Notching allowed. Wheelie bars are not allowed.
Firewall
Stock firewall must be retained and in stock location. Notching for clearance of bell housing, distributor, or supercharger allowed. Smoothing of firewall for appearance is allowed.
Engine
Any engine combination and power adders allowed. single type power adder only . Motor plates and solid mounts allowed. Mufflers required for all cars.
Transmission
Any OEM type automatic or manual transmissions allowed. After market heavy-duty cases allowed.
Electrical
Stock headlights, taillights required and must be functional. Electrical. Bracket racing aids, such as optical sensors, boxes and electrical or pneumatic throttle stops are not allowed.
Tires
DOT Radial Tire, max 12” measured tread widths
DRAG RADIAL WEIGHT GUIDE
• 3,200 lb. base weight
Deductions:
• Small Block Nitrous – deduct 400 lbs.
• Naturally Aspirated – deduct 600 lbs.
Additions:
• Twin Turbo – add 100 lbs.
• Sheet Metal Intakes (Nitrous only) – add 50 lbs.
Field Size and Ladder:
RACE DAY POLICY'S SCALES:
After each qualifying and elimination pass, all cars must stop and weigh at the track scales. If you lose in eliminations, and your opponent fails to make weight you will be reinstated into the eliminations only if you made minimum weight requirements. If both cars failed to make minimum weight, both cars will be disqualified. It is the driver's responsibility to verify with each track scale, the weight of his/her car prior to each race day. There will 5 lb error factor allowed.
TOW BACK & TOW VEHICLES:
All Outlaw 10.5 entries are allowed to tow to staging lanes and to the track scales with a golf cart or other similar small tow vehicle. All carts will be subject to search by a MMP Official at any time.
BYE-RUNS:
All vehicles must take the tree, and run down the 1/4 mile.
For questions or more information on these rules, please contact
901.461.2515
Upcoming Events
March 2008
April 2008
May 2008
June 2008
July 2008
August 2008
September 2008
@ VMP
October 2008
November 2008